|
| |
Diamond C
By Christine Cox
|
 |
|
Click for larger image
|
I found a great new way to use
our Landscape Metal and Leather Journal Kit! I
cut the cover into 2 pieces; one piece 1" wide and one piece 4 3/4" wide
(you'll need to cut a 1/4" strip off one piece to achieve these
measurements). I then made some elegant diamond shaped ornaments and riveted
through the ornaments, the leather, the spine, the text block, the back
cover, the leather again and the decorations on the back. Whew! I wasn't
sure that 2 long rivets made from wire would be sufficient to hold the book
together but it is just as sturdy as can be. There's a 1/4" joint between
the 2 pieces of metal on the front of the book. The leather is what holds
the right, front piece of the cover on.
|
Since 9/9/04
|
